NEW Dan Kubin V3/23 Sidewinder with RCA!
"The V3/23 follows the same concept as the past V3r, but focusing on what makes a Sidewinder a Sidewinder. Hard hitting, effortless, and zippy. -Intended for experienced artists who don't want to mess around.
The Model 23 is more reminiscent of the original 2019 V3r, but with some improvements in tuning longevity. We stripped it down a bit more and added the extra performance.
The stroke wheel has been simplified with 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longest stroke range, a middle mark being the default setting, and a short mark to signify the shortest stroke range. The sound of the machine has been improved compared to the 2nd and 3rd V3r variation. In addition, the machine is now a little lower, which provides more ergonomics".
Thanks for watching - Dan.
RCA specifications:
* The RCA version is wired for harder hit mode only with RCA connection. If a clip cable is used on this version, they are wired the reverse of the standard clip cable version, use positive side down for hard hit, positive side up for a duller hit.
* This RCA motor housing was designed around a Critical Universal battery pack, but fits most of the battery packs I've tested, such as Musotoku, Ink Claw, and Papa.
* This will also work well with a right-angled RCA cable.
* The clip cable option still works, it is just connected backwards.
* The position of the battery makes the balance point of the machine much more forward, like a biro.
Machine specifications V3/23:
* DK Thumbscrew, new armature bar and updated running wheel for improved performance.
* The renowned rotary plotter. Effortlessly sinks any size of line by simply brushing against the skin.
* The engine is the same as the Sidewinder V2-V4 and V7, which has stood the test of time. It has long been a favourite of Sidewinder collectors.
* Vice-Lock which is easy to tighten on almost any tube.
* Ideal for all types of in-line work or as a quick shader/packer.
* Timing mark on cam and frame to adjust the impact screw (same as V5 and V6)
* Stroke dial marked so you can easily play with the stroke without fear of losing that sweet spot. You can't make it too long or too short.
Machine configuration:
* Standard needle on bar: Wrap a thick rubber band around the motor cover and across the front of the machine to add tension to the needle bar. Thick rubber bands and Dan's Perfect nipples are recommended.
* Cartridges: Wrap a rubber band around the motor cover and over the top of the armature rod to counteract the upward tension of the cartridge. Both thick and standard rubber bands will work, it will just depend on the tension of the cartridge membrane or rubber band to determine which rubber band provides adequate counter resistance.
The V3R and V3/23 Sidewinders are designed and tested by Dan, milled in his most trusted machine shop in Kansas City, and then built by DK trained and certified technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous quality checks and all are run through our testing machine to break them in lightly.
*All models have a one year warranty. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians listed on his website.
