Workhorse Irons New Seth Ciferri Modern Classic...
Workhorse Irons New Seth Ciferri Modern Classic...
Workhorse Irons New Seth Ciferri Modern Classic...
Workhorse Irons New Seth Ciferri Modern Classic Liner Gold
Workhorse Irons New Seth Ciferri Modern Classic Liner Gold
Workhorse Irons New Seth Ciferri Modern Classic Liner Gold

Workhorse Irons New Seth Ciferri Modern Classic Liner Gold

SETH.C.MCLGOL
Out-of-Stock
€350.10
VAT excluded

By buying this product you can collect up to 35 loyalty points. Your cart will total 35 points that can be converted into a voucher of €3.50.



 

New Seth Ciferri Modern Classic Liner!

After many years, Seth has given his Classic Liner and Shader some major updates, modifying the entire frame and geometry to create this Modern Classic. With sculpted curves, various subtractions and additions, these aluminium frames are made in such a way that there is no additional vibration or chatter. Leaving the user with a highly functional, lightweight, forward balanced, easy to use and visually appealing machine. It's a Workhorse with a modern twist.

Technical specifications:

* Lightweight CNC cut aluminium frame

* Highly durable, rust-resistant anodised finish

* Deluxe blackened steel hardware, including front clamp binder and rear inlaid steel binder for better connection.

* Side coated guillotine screw, ideal for use with disposable and steel tubing.

* 1/4" iron coil yoke with inlay for better performance and less vibration.

* 1" T-stop coils with 8-turn wrap

* Medium-Fast Speed with a Solid Stroke

* 140-145 Hz Operation at 6V Unloaded

* Pushes from 3rl to 11rl with no problem

* weighs a mere 5.5 ounces!

* As always, MADE IN THE USA

Here are some words from Seth about the evolution of his "Classic":

In 2003, when BJ and I founded Workhorse Irons, we each had a model available! The frame style I chose was based on what we have come to know as the Coleman style frame, popularized by Paul Rogers, and many who came after him, recognizing the versatility and functionality of its geometry.

With a few simple adjustments, almost any type of line or shade machine can be set up with relative ease. We call it the Classic, in recognition of its well-established lineage. As thousands of the "classic" liners and shaders have found their way into the hands of tattooers; from the beginning, established and everywhere, we've received incredible feedback on what you've come to want in an everyday workhorse. Over the years, we have used a handful of different materials for these machines, mainly cast iron, with some limited editions in brass, aluminium, "prefabricated" 3-piece steel frames and finally CNC machined blocks of "10-00" iron.

Rather than trying to produce a machine that adheres to the aesthetics and expectations of old school tattooing, this time we have addressed numerous shortcomings of the average "iron", and have designed a couple of machines with the intention of making them a pleasure to use.

The position of the clipcord and the simple operation of the vise became priorities. If the clipcord cannot maintain a solid connection while you work, then your work becomes tedious and annoying. If your vise can't hold any pipe, or requires the use of additional tools to get in and out of the machine, then you are wasting valuable time and energy that could be spent making money.

We wanted to create a tool that was light and balanced, but rigid and strong enough to keep us in tune. With an extra deep pocket for an extra thick steel yoke and a drop-in vise, we worked around the issue of frame height to determine which tubes are long enough to accommodate standard length needles, and we placed enough ferrous mass under the magnets to keep them on at low voltage, striking as hard as desired, all day long.

Aluminium frames tend to wear out at the connections, so we've added a steel insert for long-lasting, reliable contact with the clip wires (again, that connection is so important!) To ensure proper alignment, we've added a recessed channel in the spring rack and an attached steel cover that sits flush with the front edge, as well as the top.

These are not gimmicks, but deliberate upgrades, each made with the tattooist in mind. The Modern Classic is designed for comfort and reliability, and is suitable for use with virtually any grouping. Start with low voltage, then dial in as you see fit to get the saturation you're looking for, at the hand speed of your choice.

We use our own and third-party cookies to improve our services and
show you advertising related to your preferences through analytics
of your browsing habits. If you continue browsing, we consider that
accept their use. You can change the settings or get more information
here