CNC Iron frame designed in collaboration by Dan Kubin and Adam Ciferri
Machine hinge/compression functionality eliminating any problems or breakage of the rear spring
Machine comes configured for use as a slow or medium speed Liner. It also works well as a fast Shader if you turn the volts down a little. To easily switch to a slow and punchy colour packer, simply remove the backing spring under the front spring.
Tuned for day to day street and/or custom tattooing.
Medium speed with enough punch to easily push 3 to 18 Rounds and up to 49 mag
Runs at 125-130 Hz @ 6 Volts with no load, ramps up to 8-10 Volts for big clusters
CNC cut iron with the utmost precision and care
Mini sized frame with custom 1" AC x DK barrel coil for longer range and lower amperage
Black Zinc Finish
Deluxe blackened DK hardware and stainless spring
Weighs 6 oz
MADE IN THE U.S.A.
Standard needle on bar: standard bobbin machine configuration. Works well with our thick rubber bands and Dan's Perfect Nipples, but also works with standard nipples/grommets.
Cartridges: possible, but not highly recommended.
"Since working with Workhorse Irons, I've had the opportunity to remaster my Revival machine, but being able to merge it with Adam Ciferri's Ghostdog platform. There have been many things I have learned from the original Revival, along with many more years of experience with the compression/rolling spring pivot. Combine this with a superior magnetic circuit that Adam and Workhorse have fine-tuned, and you get something quite magical. We are very pleased with the performance, versatility and ergonomics of this machine.
Its functional voltage range starts at around 4.5 volts, and keeps going up without excessive chatter or heat.
With the engineering that went into the spring configuration, the user doesn't have to settle for soft suckers to keep their springs from breaking. This machine comes from stock as a strong, medium speed (or fast shading) liner at around 105-110 cps loaded. (Around 125-130 cps unloaded) Due to the large voltage range, it is capable of all size needle groupings. (*the contact screw can be removed to run in the 90 cps range as well)
For a stronger stroke, the support spring under the contact spring can be removed.
I have paid close attention to weight distribution, to put the weight forward and low, providing superior stability, and preventing wrist fatigue.
Ladies and gentlemen, the Ghostdog Revival!"
Thank you - Dan.