Limited Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid - Frosted Rose / Gold Workhorse Irons

Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid

Machine Specifications:

* CNC iron frame designed in collaboration by Dan Kubin and Adam Ciferri

* Machine hinge/compression functionality eliminating any rear spring problems or breakage

* Machine comes configured for use as a slow or medium speed Liner or a fast shader. To easily switch to a slow and punchy colour packer, simply remove the backing spring under the front spring.

* Tuned for all day, street shop and/or custom tattooing

* Medium speed with enough punch to push 3's to 14's no problem.

* Runs at 125-130 Hz @ 6 Volts with no load, ramps up to 9-10 Volts for big clusters.

* CNC cut plate with the utmost precision and care for superior conductivity

* Mini sized frame with Custom AC x DK 1" Keg Coil for longer range and lower amperage

* Custom frosted pink plated finish

* Deluxe DK 24k Gold plated hardware and stainless spring

* Weighs 6 oz

* MADE IN THE U.S.A.

*

Machine set up:

* Standard needle on bar: standard coil machine set up. Works well with our Thick Rubber Bands and Dan's Perfect Nipples, but also works with standard nipples/grommets.

* Cartridges: possible, but not highly recommended.

"Since working with Workhorse Irons, I've had the opportunity to remaster my Revival machine, but being able to merge it with Adam Ciferri's Ghostdog platform.There have been many things I've learned from the original Revival, along with many more years of experience with the spring pivot/compression roll.Combine that with a superior magnetic circuit that Adam and Workhorse have dialed in, and you get something quite magical. We are very pleased with the performance, versatility and ergonomics of this machine.

It's functional voltage range starts at around 4.5 volts, and keeps going up without vibration or excessive heat. With the engineering that went into the spring configuration, the user doesn't have to settle for soft nipples to keep their springs from breakinghis machine comes stock as a strong, medium speed liner (or fast shader) at around 105-110 fps loaded (around 125-130 fps unloaded)

Due to the wide voltage range, it is capable of all sizes of needle groupings (* the contact screw can be removed to operate in the 90 cps range as well). For a stronger and more forceful stroke, the support spring under the contact spring can be removed.

I have paid close attention to weight distribution, to put the weight forward and low, providing superior stability, and preventing wrist fatigue. Ladies and gentlemen, the Ghostdog Revival!"

Thank you - Dan.